CJ 3 – Standard Spray Booth

The Model CJ 3 Spray Booth is our standard flagship model and comes with enhanced extraction and lighting.

Description	Data
External Dimensions	7 000 mm (L) x 5 350 mm (W) x 3 400 mm (H)
Internal Dimension	6 900 mm (L) x 3 900 mm (W) x 2 650 mm (H)
Entrance Dimensions	3 000 mm (W) x 2 600 mm (H)
Personnel Door Dimensions	650mm (W) x 1800mm (H)
Structural Material	Manufactured from 50 mm EPS Insulated Panels
Lighting System	Ceiling: 8 Fittings: Each 4 x 32 W Tubes Side Lights: 8 Fittings: Each with 2 x 18 W Tubes LED is Optional
Airflow Volume	25 000 m³/hour
Total Power Consumption	17.5 kW
Power Supply	380V / 50 Hz / 3 Phase
Electrical Control System	380V / 50 Hz / 3 Phase Included
Ducting	3m Straight Lengths with 1 x Exhaust Bend
Floor Basement	Galvanized Steel 300 mm (H) 2 Rows of Floor Grids with Floor Filters 3 x Rows of Indented Plate 2 x Ramps: 500mm (W) x 2000mm (L)
Air Generation System Location	Left, Right or Rear – Client to specify (Right by Default)
Intake Fan	1 x 7.5 kW Turbo Fan
Extraction Fan	1 x 7.5 kW Turbo Fan
Baking Heating System	Riello G20 Diesel Burner @ 200 000 Kcal/Hr
Operating Temperature	60 °C – 80 °C
Filtration System	4 Stage: Pre-Filter, Ceiling Filter, Fibreglass Floor Filter, Activated Carbon Final Filter.
Heat Exchanger	Stainless Steel 304

The dimensions can be changed to meet your requirements.
The Extraction Exhaust System is equipped with a single stage filter system driven by a double intake extraction fan.
The spray booth is equipped with the required lighting on both sides along the length of the ceiling.
Additional lighting is installed along the sides of the walls and centred for enhanced lighting and added security in regards to your paint finish.
All induced air into the spray booth is filtered prior to entering the intake system.
The air is induced into the spray booth via the ceiling cavity which is fitted with the highest quality filter media.
The booth is placed under a positive pressure and all spray and fumes are forced downward into the false basement.
The spray booth extraction system filters all exhausted air through the floor filters and ensures optimum performance and enhanced airflow, which results in increased operator comfort and a higher quality paint finish.
The spray booth is fitted with a baking system which is fuelled either by diesel oil or gas, depending on your preference. Additional information about the baking system will be supplied upon request.
The spray booth is installed with 3m exhaust ducting. Should additional ducting be required in order to exhaust 1m above the roof level of your premises, this could be supplied as well.